Free wastewater analysis
Send us 5 L of wastewater — get a chemist’s report.
Is your company on the 2026 inspection plan?
Names in the plan are in Ukrainian — part of the name is enough, without “ТОВ” or quotes.
What matters to you right now?
Pick one — we’ll show what the analysis gives you.
The chemist’s report shows that your wastewater is being tested and a treatment process is being worked out.
The report does not replace permits and does not guarantee an inspection without findings.
Actual effluent composition, reagents and the cost of treating 1 m³ — a solid basis for decisions and for talks with the water utility.
Trial treatment shows which process works on your wastewater — before you choose equipment.
The analysis gives you a technical basis for planning while the changes are still ahead.
5 litres — and you’ll know your parameters before and after trial treatment.
From 5 litres to a report
Drag the slider
Wastewater before and after reagent selection in the lab.
Order a free analysisIllustration. Results depend on your wastewater composition.
| Parameter | Before | After |
|---|---|---|
| COD, mg/L | 2,480 | 310 |
| Suspended solids, mg/L | 960 | 42 |
| Fats, oils and grease, mg/L | 385 | 18 |
| pH | 5.2 | 7.4 |
What the report includes
- 1Parameters before and after trial treatment
- 2Reagents and working doses
- 3Estimated cost of treating 1 m³
- 4Process recommendation
You can use the report with regulators as evidence of testing and of work on a treatment process.
The analysis report does not replace mandatory permit documentation and does not guarantee the absence of findings by regulators.
Confidential: your data is never shared with third parties
Who analyses your wastewater
The analysis comes with no obligation
- Analysis
- Trial treatment
- Chemist’s report
- Feasibility study
- Design
- Equipment
- Installation
- Commissioning
- Service
“Clean Wastewater” programme
From the lab to working treatment plants
The essentials
How much does the analysis cost?
It’s free: sample analysis, trial treatment and a chemist’s report.
Does the analysis oblige us to buy equipment?
No. The analysis gives you actual data and tests whether your wastewater can be treated. The next steps are your decision.
Why bother if we have no wastewater problems right now?
That’s exactly why it’s easier to do it now rather than in emergency mode: you’ll know your effluent composition, whether it can be treated and the right process in advance.
Will the report help during a State Environmental Inspectorate check?
The report shows that your company is testing its wastewater and working out a treatment process. It does not replace mandatory permits and does not guarantee an inspection without findings.
What exactly do we get?
A chemist’s report: parameters before and after trial treatment, reagents and doses, an efficiency assessment, the cost of treating 1 m³ and a process recommendation.
Who will see information about our company?
No one except ZIKO specialists. Data about your company, wastewater and test results is never shared with third parties.
How do we hand over the sample?
After you send a request, a ZIKO engineer will contact you to arrange sampling and delivery of 5 litres of wastewater.
Order a free analysis
A ZIKO engineer will contact you to arrange the sample handover.
We don’t guess — we test.
We don’t oversell — we select what you need.